Hello! For over 25 years I have consulted and taught on the topics of digital photography, workflow, image backup, printing and color management for individuals and corporations.
I served as Editorial Director of Digital Imaging Techniques magazine for two years, where I wrote and edited numerous articles and reviews on the topics of digital and fine-art photography, inkjet printing, and Photoshop techniques. I've also conducted seminars across the United States at photo-related conferences including the Arles Photo Festival (Arles, France) and the PhotoPlus Expo (New York City), and have lectured and/or taught at institutions including Columbia University and the International Center of Photography (ICP) in New York City.
My photography has been exhibited in numerous group and solo shows, and my work has been included in many photography publications. I'm the editor and founder of The Imaging Buffet Digital Magazine (https://imagingbuffet.com) and I publish a Photo Tips Newsletter, which includes tips and techniques related to fine-art printing and digital imaging.
I've written four books (all related to photography), and my Amazon Author page can be found here:
I’ve been photographing people as a professional photographer and writer for over 25 years, but I’ve always focused more on catalog, advertising, product reviews and beauty salon-related work than runway shows and similar events that often occur during Fashion Week in Manhattan in February every year. However, last year I could not pass up an opportunity to attend an invitation only special event sponsored by Epson called the Digital Couture Project. On February 6, 2018, the 4th Annual Epson Digital Couture Project is happening once again, and I expect it to be just as impressive as the 2017 event.
Since this is not a topic I cover a lot here on imagingbuffet.com, I think I should mention who I think will get the most from this article:
• Anyone who wants to see cutting-edge fashion from designers around the world. To me, it’s like a global art exhibition, but with the designers expressing their art through their textile designs, and with male and female models serving as moving canvases. Two words kept coming to mind as I was looking at the wide range of textiles, color palettes and unique approaches to fabric printing: “Truly Incredible!”
• Anyone who has an interest in any type of garment printing, from direct-to-fabric printing (using printers like Epson’s SureColor F2000 and F2100), to dye-sublimation transfer printing (using printers like Epson’s SureColor F9370, F6200 and F7200). Once you see how these machines work, it’s easier to understand the technology and capabilities. I’ve included a YouTube video from Epson below that shows how an image can go from artwork on a screen to a design on fabric by first printing on a dye-sublimation transfer paper (in this case using an Epson SureColor F6200 printer), and then using a heat press to transfer the art to a fabric.
The video below offers a sneak peek into the 2017 event, and I especially like how they interview the designers who created the clothing:
Epson created an excellent overview of the 2018 event, its designers and the printers used for the projectHERE.
Also, below is a GIF (courtesy of Epson) showing many of the featured collections from the 2018 event, as well as a list of the designers who participated:
United States (New York) – threeASFOUR (Gabriel Asfour, Angela Donhauser and Adi Gil)
A selection of the fashions created by the designers listed above for the 2018 Epson Digital Couture event
For More About the Tech Behind the Fashion
The Epson SureColor printers listed earlier can also be used to print on transfer paper that can then be used with a heat press to create dye-sublimation metal prints (extremely popular these days), jewelry, snowboards, skateboards and much more. This page has much more on that, including information on how to request a free printed sample. Below is one of the Epson SureColor printers that was set up at the Digital Couture Project. It shows a few designs printed on dye-sublimation media prior to transferring the images to one or more fabrics using a heat press.’
Fashion designers and professionals (such as those who run print service bureaus), who are interested in Epson’s digital printing technologies can visit www.proimaging.epson.com for more information.
There are a few things that I should note about these photos. First, I used a Canon EOS 6D full frame 35mm DSLR for all of them. The 6D is outstanding in low light, allowing for the use of about ISO 1200-3200 with little to no visible noise in the shadow areas. If there is noise, it tends to be very “grain-like” without a lot of different colors, so it’s easy to reduce in Lightroom or other software. To increase my odds of getting sharp images, I used a combination of Shutter Priority Mode (set at between 1/1oo and 1/200 sec) with Auto ISO because I was relying on available light that was constantly changing, and not on or off-camera flash or LED lighting. I like the natural look that results from that approach, but it did mean that many of my photos had to be taken at ISO 3200 because the lens’ maximum (most open) aperture is f/4.5-6.3, depending on where in the zoom range the photos are being taken.
I also used just one lens for the entire shoot. It’s a beast of a lens due to its size and weight (approximately 4.1″ x 8.6″ (10.41 x 21.84 cm) and 4.33 lb (about 2 kg)), but I love it: the Sigma 50-500 f/4.5-6.3 APO DG HSM OS Lens For Canon EOS (it’s available in other mounts as well). It’s incredibly versatile due to its range, and I found the results to be very sharp at all focal lengths. As you can probably see from the images below, I enjoy taking photos from different angles, including from the back, as well as close-ups of items like shoes, which may or may not have been digitally printed like all of the other clothing. Some of the footwear by some of the designers was definitely printed digitally, which you can see in the video overview posted above. I believe that taking photos from behind a model, or when just one out of three of the models is facing forward, works very well because clothing is usually designed with attention to all of the “camera angles.”
And in case you are wondering here is the photo info for the image that opens this article and that shows designs by Daniela Hoehmann: 1/200 sec, f/4.5, ISO 3200.
For more than two years I’ve been teaching photographers and other artists how to get the most from Adobe Photoshop Lightroom, including editing, organizing, presenting and printing images using the application. It’s a very powerful tool, but it definitely takes time to learn, and Lightroom 4 brings with it many new features and a new processing engine.
Andrew Darlow conducting a Lightroom workshop in Princeton, NJ
To show an example of what I’ll be covering, this particular image will be shown step-by-step from raw capture to the final edited image. I think it shows what’s possible when you use Lightroom’s Develop Module to recover highlight data and use the application’s selective adjustment options:
In case you haven’t seen the news, earlier today, September 23, 2008, Adobe Systems released a big update to the Creative Suite family of applications. There is a lot to cover, and after reviewing a number of resources that cover this news, I’ve highlighted a few sites that lead to more links, as well as some direct links to related info.
1. First, if you receive this e-mail in time, I recommend visiting this page to sign up for a live webcast to see many of the new features in the CS4 suite. I was unable to attend the 9am Eastern (EST) webcast, so I signed up for the 9am Pacific (PST) webcast.
Find all current special offers on Adobe products. (One of the current offers is 30% off Lightroom 2: Purchase a full or upgrade version of Adobe Photoshop Lightroom 2, along with a full or upgrade version of Photoshop CS4, Photoshop CS4 Extended, or Creative SuiteÂ® containing Photoshop CS4 or Photoshop CS4 Extended).